HP Design Jet 1050c/1055cm Plotter Repair and 1050c Maintenance Service Error Code Repairs Near Los Angeles, Orange County, Inland Empire, Riverside and San Bernardino Ca.

DesignJet 1050c/1055cm plus plotter repair with system error codes in Southern California!

We specialize on HP Design Jet 1050C/ 1055CM plotter repair printer and 1050C plotter service in Los Angeles and Orange County cities with broken belts, print head replacement errors, image defects and system error code repairs. We provide fast onsite DesignJet 1050c/155CM maintenance service in Southern California. Our technicians have the knowledge to repair 1050c/1055CM plotters on the first visit.
Our Design Jet 1050C/1055CM technicians are highly trained to solve Design Jet system error codes and failures at one visit. Design jet 1050C/1055CM repair parts, most mechanical parts and some electronic parts are common.
We specialize on HP DesignJet 1050c/1055cm plotter Error code 0B0006 trailing cable incorrectly installed, error OB0009 Unable To Detect Aerosol error 0C0030 bad drop detector,error code 04Cxxx EIO card hard disk drive error, error 010042 Service Station-Axis Encoder error.
We specialize on Design Jet 1050c and 1055cm repair with broken belts, ink tubing system, carriage Assembly, trailing cable and service station. We stock most common DesignJet 1050c/1055cm plotter repair parts to provide fast onsite service. After replacing the ink tubing system we always purge the ink tubes to ensure proper ink flow to the print heads.

We Carry Design Jet 1050c/1055cm Belt Kits, Inks and Print Heads to Provide Plotter Service at Your Site!

We stock HP Design Jet carriage belts, print heads and inks to repair 1050c/1055cm on the first visit!

We carry original HP design jet 1050c/1055cm belts, belt kits, print heads, inks and print head cleaners to repair Design Jet plotters on the first visit. Fast onsite flat rate belt replacement service on Design Jet 1050c, 1055cm and 1050cm plus. We keep your design jet 1050c/1055cm printing trouble free with regular plotter service.
Providing DesignJet 1050c/1055cm plotter repair with hardware failures, numerical error codes, network settings or plotter driver problems. We specialize on Design Jet 1050c/1055cm plotter error code repairs failing with bad hard drive, network cards, power supply failures, trailing cable failure and broken belts. We provide DesignJet 1050c/1055cm plotter repair with broken carriage belts on 36-inch wide format printer repair.

HP Designjet 1050c and 1055cm Plotter Service and Repair in Southern California!

What is included on DesignJet maintenance service and plotter repairs?

  • Cleaning the DesignJet 1050c and 1055cm plotter carriage rails.
  • Lubricate the Design-Jet 1050c and 1055cm plotter carriage rails.
  • DesignJet 1050c and 1055cm encoder Strip cleaning and inspection.
  • Inspect and Clean the 1055cm and 1050c plotter Platen Assembly.
  • Clean the entire Design Jet 1050c and 1055cm plus plotter/printer.
  • Calibrate the HP Design Jet 1050 and 1055cm plus plotter print head after replacing the belt.
  • Calibrate the Color after the 1055cm and 1050c plotter service is performed.
  • HP design jet 1050c and 1055cm plotter quality test printout.
  • We offer fast design jet 1050/1055cm maintenance service error code repairsĀ  in Southern California.
4131.HP__DesignJet__1050C_Plus

Free Cleaning on Every HP Designjet 1050c/1055cm Plotter Repair in Southern California!

What is included in cleaning and maintenance service on HP DesignJet plotter?

  • Clean HP design jet 1050/1055 Plotter Carriage Rails.
  • Lubricate the HP Design-Jet 1050/1055 Plotter Carriage Rails.
  • Cleaning the HP DesignJet 1050c/1055cm Drive Roller
  • Designjet Encoder Strip Cleaning and inspection.
  • Inspect and Clean the HP 1050c/1055cm plotter Platen Assembly.
  • Clean the entire HP Design Jet plotter 1050/1055 models
  • Calibrate the HP plotter 1050c/1055cm print head after replacing the belt.
  • Calibrate the Color after the 1050c/1055cm plotter service is performed.
  • HP designjet 1050c/1055cm plotter Quality test printout.

Designjet 1050c/1055cm Repair with Numerical Error Codes in Southern California!

We provide DesignJet plotter repair with error code failures!

HP Design-Jet plotter description HP Design Jet plotter models Service/Repair in LA – OC
HP Designjet 1050C Plus Plotter Repair C6074B | C6074BR
HP Designjet 1050C Plotter Repair C6074A|C6074AR
HP Designjet 1055 CM Plotter Repair C6075A|C6075AR
HP Designjet 1055CM Plus Plotter Repair C6075B|C6075BR|CQ532A

We Provide Numerical Error Code Repairs on All Models Of HP Designjet 1050c and Design Jet 1055cm Plotter!

HP Design Jet Plotter Error Codes Introduction:

System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.

Continuable and non-continuable HP DesignJet 1050c and 1050cm numerical errors

Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.

Design Jet 1050c/1055cm plotter error codes HP Design-Jet 1050c & 1055cm plotter error description
DesignJet 1050, 1055 Error 0B0000 Bad Ambient Temperature Measured
Design-jet 1050, 1055 Error 0B0001 Bad Humidity Read.
Design jet 1050, 1055 Error 0B0002 Bad IDS Pressure Read.
Designjet 1050, 1055 Error 0B0003 ACDO Internal Channels Check Failure.
Design jet 1050, 1055 Error 0B0004 Unable To Detect Pump.
Design-jet 1050, 1055 Error 0B0005 Unable To Detect Valve.
Design jet 1050, 1055 Error 0B0006 Trailing Cable Incorrectly Connected or Fuse In Electronics Module Has Burned.
Design-jet 1050, 1055 Error 0B0007 Unable To Detect Vacuum Fan.
Design jet 1050, 1055 Error 0B0008 Unable To Detect Cooling Fan
Designjet 1050, 1055 Error 0B0009 Unable To Detect Aerosol Fan (Including On Right Cover).
Design-jet 1050, 1055 Error 0B000A Primer Shut Down Error.
Design jet 1050, 1055 Error 0B000B Pump Or Pressure Sensor Not Working.
Designjet 1050, 1055 Error 0B000C Serial Device ADC Test Failure.
Design jet 1050, 1055 Error 0B000D 24 V Source Test Failures.
Designjet 1050, 1055 Error 0B000E Short Circuit In Scan-Axis Motor.
Designjet 1050, 1055 Error 0000D8 External Library Error.
Design jet 1050, 1055 Error 0B000A Primer Shut Down Error
Design-jet 1050, 1055 Error 0B000B Pump Or Pressure Sensor Not Working.
Designjet 1050, 1055 Error 0B000C Serial Device ADC Test Failure.
Designjet 1050, 1055 Error 0B000D 24 V Source Test Failure.
Design-jet 1050, 1055 Error 0B000E Short Circuit In Scan-Axis Motor.
Designjet 1050, 1055 Error 0000D8 External Library Error.
Design-jet 1050, 1055 Error 01002D The Main PCA Cannot Communicate With The Carriage.
Designjet 1050, 1055 Error 010020 Firmware DIMM Test Failure.
Designjet 1050, 1055 Error 010021 Memory Module Test Failure
Design-jet 1050, 1055 Error 010023 EEROM Test Failure.
Designjet 1050, 1055 Error 010028 EEROM Checksum Failure.
Designjet 1050, 1055 Error 010029 EEROM Write Failure.
Design-jet 1050, 1055 Error 010040 Error In Paper-Axis Encoder quadrature.
Designjet 1050, 1055 Error 010041 Error In Scan-Axis Encoder quadrature.
Designjet 1050, 1055 Error 010042 Error In Service Station-Axis Encoder quadrature.
Design-jet 1050, 1055 Error 010050 PostScript Processing Error.
Design-jet 1050, 1055 Error 01009X Error In Paper-Axis Motor Encoder.
Design jet 1050, 1055 Error 02xxxx PostScript/Firmware Error.
Designjet 1050, 1055 Error 04Cxxx EIO Accessories (EIO Card/Hard Disk Drive) Error.
Designjet 1050, 1055 Error 048xxx EIO Card Is From A Third Party Vendor May Not Be Fully Compliant With IIO Protocol Specification 2.0 OR EIO Card Firmware Is Not Updated.
Designjet 1050, 1055 Error 048500 There Are Too Many EIO Cards Connected To Printer
Designjet 1050, 1055 Error 060300 One Of The Print heads Has Internal Electrical Problem.
Designjet 1050, 1055 Error 060301 One Of The Print Heads Has Internal Electrical Problem.
Designjet 1050, 1055 Error 060305 Thermal Shutdown Error(One Of The Print heads Has Gone Above Maximum Temperature).
Designjet 1050, 1055 Error 060306 Problem With Print head Selection.
Designjet 1050, 1055 Error 060307 APA Regulation Failure.
Designjet 1050, 1055 Error 060308 APA Regulation Failure.
Designjet 1050, 1055 Error 060309 Problem With Setting The Voltage Of Printheads.
Designjet 1050, 1055 Error 06030A Error In Finding The Mark Encoder.
Designjet 1050, 1055 Error 06030B The Ambient Temperature Measured Is Out Of The Normal Range.
Designjet 1050, 1055 Error 070100 Firmware Error
Designjet 1050, 1055 Error 080001 PostScript Error
Designjet 1050, 1055 Error 09xxxx EIO Accessories (EIO Card/Hard Disk Drive) Error.
Designjet 1050, 1055 Error 09Axxx Internal Error.
Designjet 1050, 1055 Error 09A001 There Are Too Many Hard Disk Drives Connected To The Printer.
Designjet 1050, 1055 Error 09Bxxx Internal Error.
Designjet 1050, 1055 Error 09Cxxx Internal Error.
Designjet 1050, 1055 Error 0A0000 The Air Pressure Is Below The Minimum Requirement.
Designjet 1050, 1055 Error 0A0010 Problem In Pressurizing The Air System.
Designjet 1050, 1055 Error 0A0020 Error In Calibrating The APS Sensor.
Designjet 1050, 1055 Error 0A0030 Problem In Depressurizing Air System.
Designjet 1050, 1055 Error 0A0040 Ink Tubes Initialization Failure Due To Low Air Pressure.
Designjet 1050, 1055 Error 0A0050 Printer Has Detected A Leak In The Tubes System Before The Life Of The System.
Designjet 1050, 1055 Error 0A0060 Printer Has Detected A Leak In The Tubes System After The Life Of The System.
Designjet 1050, 1055 Error 0A0070 The Backup EEROM Contents Stored In The Tubes Systems Are Not Consistent With The Ones Required By The Firmware.
Designjet 1050, 1055 Error 0C0030 Bad Drop Detector.
Designjet 1050, 1055 Error 0C0032 Drop Detector Not Calibrated For All Printheads.
Designjet 1050, 1055 Error 0C1000 Primer Not Calibrated.
Designjet 1050, 1055 Error 0C1001 Primer Shutdown Error.

Same-day On-site HP Designjet 1050c as Well as Design-jet 1055cm Plotter Service with Belt Kit Replacement!

We offer Design Jet maintenance service and repairs with genuine plotter repair parts. We always lubricate the carriage to move freely andĀ  after replacing the belt kit on every design jet plotter repair. We libricate the carriage rods and Lubrication allows the carriage to move freely and avoid the carriage belt to break prematurely.
We stock HP Design Jet Plotter carriages Belt Kits, Hard Disk, trailing cables, ink tubing systems, carriage assembly and print heads to provide you fast onsite plotter service in Southern California. Our HP Design Jet repair team carry most common design jet 1050c/1055cm parts.