HP Designjet T1100, T1120, T610 Repair, HP T1100, T1120, T610 Maintenance Service Error Code Repairs and Design-jet T1100, T1120, T610 Plotter Repair Los Angeles, Orange County, Riverside County and Inland Empire!

Los Angeles and Orange County Design-Jet T1100, T1120 and T610 series printer repair services!

We specialize on HP Design-Jet T1100, T1120 & T610 repair and onsite service with system errors 11:11 trailing cable, 21:10 service station, 21:13 service station failure, error 47:01 star wheel motor, 86:01 carriage jam and print head error in Los Angeles, Orange County and Riverside.

Plotter repair by LaserJet Printer Repair Company on wide format Design Jet plotter series 500/510/800, 1050/1055cm, HP 5000/5500, design-jet 430/450, 750/755cm, HP 4000ps/4500, HP T1100, T1200, T1300, Z2100/Z2200/Z2300, Z5200/Z5200ps, Z5400, Z5600, Z2600 repairs and onsite plotter services. We have the knowledge to repair HP T1100, T1120 and T610 plotters on the first visit.

We offer 6 months warranty on all HP plotter replacement parts to provide Design Jet T1100, T1120 and T610 plotter repair service in Southern California. We carry most common Design-Jet T1100, T1120 and T610 plotter parts to fix hardware failures with numerical error code on the first visit.

We specialize on HP designJet T1100, T1120 and T610 wide format plotter 11:01, 12:11, 21:13, 22:10, 41:01, 47:01 and 86:01 paper jam error code repairs.
Our technicians repair DesignJet T1100/T1120 and T610 broken belts, ink tubing system, carriage Assembly, trailing cable and service station replacement during a plotter repair.
We offer T1100/T1120 and T610 error code 11:11 repairs, 12:11, 21:10, 22:10, 41:10, 42:10, 79:04, 86:01  and 47:01 error code repairs.

HP Design-jet T1100, T1120 and T610 Power Supply Fan Making Noise and Does Not “boot” It Displays Error Code 03:10.

DesignJet T1100 repair, T1120 plotter repair, T610 plotter service,We offer Design-Jet T100, T1120 and T610 high pitch noise plotter repair with system error 03:10 by replacing the noisy power supply. There is a cooling fan in the Power Supply which has a noisy bearing in the fan assembly, and with enough resistance it causes the error code: 03:10 that shut down the plotter. When you hear this noise it is best to call us and get the power supply replaced before the power supply gets heat damage due to not enough air circulation.

Design Jet T100 - T1120 - T610 print heads

We Carry Design Jet T1100, T1120 as Well as T610 Plotter Carriage Belts!

We stock DesignJet T1100, T1120 and T610 plotter parts and print heads to provide quick service!

We carry original HP design jet T1100, T1120 and T610 24 inch belts, 44 inch original belt kits, trailing cables and encoder strips to repair your DesignJets on the first visit. Fast onsite DesignJet T1100/T1120 plotter belt kit replacement at flat rate labor charge. We keep your design jet T1100, T1120 and T610 plotter printing trouble free with regular plotter service.
we specialize on Design Jet T1100, T1120 and T610 plotter repair with hardware failures, network settings, hard disk failure and network cards error. We carry Design-Jet T1100, T1120 and T610 plotter Print heads and inks to provide fast plotter service.

Most Common Service Error Codes on Design-jet T1100, HP T610 and T1120 Series Plotters

DesignJet printer/plotter error code repairs in Southern California!

  •  Error Code 47:01 – Star Wheel bail arm was not moving up or down due to star wheel Motor
  • Error Code 41:01 – Electrical fault or current limit in Media-Axis Motor due to paper jam or 47:01 Error code
  • Error Code 03:10 – Noise coming from L/H side of printer with error – Need Power Supply.
  • Error Code 86:01 – Encoder strip (24″ Encoder” 44″ Encoder) dirty need cleaning or replacing.
  • Error Code 86:01 – Scan-Axis Motor failure (likely due to obstacles in the scan axis or electrical fault). Carriage belt (24″ Belt 44″ Belt) worn or Scan Axis motor faulty.
  • Error Code 08:11 – No communication between the Front Panel and the Main PCA.
  • Not Cutting – Cutter needs cleaning or cutter replacement..
  • Error Code 21:13 – Fail moving Service Station
  • Error Code 11:01 – Trailing cable issues (24″ Trailing Cable 44″ Trailing Cable)

We Carry Design Jet T1100/t1120/t610 Belt Kits and Plotter Supplies to Provide Fast On-site Plotter Repair/service!

We carry Original design jet T1100/T1120/T610 carriage belts for fast on-site DesignJet repair on the first visit. DesignJet service parts such as print heads and inks are special order supply items. We keep your design jet T1100/T1120/T610 plotter printing trouble free with regular service. We offer DesignJet plotter repair with broken belts in Southern California at a flat rate labor charge.

DesignJet T1100 repair, T1120 plotter service, T610 plotter repair,

HP T1100, T1120 and T610 Plotter Repair Error Codes

Most common DesignJet T1100/T1120/T610 plotter service error code repairs.

  • 11:11 trailing cable failure
  • 12:11 carriage assembly failure
  • 21:10 service station failure
  • 22:10 ink supply station failure
  • 41:10 paper axis motor failure
  • 42:10 scan axis motor failure
  • 43:10 vacuum fan failure
  • 61:04 firmware failure
  • 86:01 Paper jam in the path
  • 72:04 firmware error
  • 79:04 firmware
  • 86:01 carriage axis shutdown
  • 93:10 ink start up failure

Free Cleaning on Every HP Designjet T1100, T1120 and T610 Plotter Maintenance Service and Repair in Southern California!

What is included in cleaning and maintenance service on HP DesignJet T1100/T1120/T610 plotter?

  • Clean HP design jet T1100, T1120 and T610 Plotter Carriage Rails.
  • Lubricate the HP Design-Jet T1100/T1120/T610 Plotter Carriage Rails.
  • Cleaning the HP DesignJet T1100/T1120/T610 Drive Roller
  • Designjet Encoder Strip Cleaning and inspection.
  • Inspect and Clean the HPT1100/T1120/T610 plotter Platen Assembly.
  • Clean the entire HP Design Jet plotter T1100/T1120/T610 models
  • Calibrate the HP T1100/T1120/T610 print head after replacing the belt.
  • Calibrate the Color after the T1100/T1120/T610 plotter service.
  • HP designjetT1100/T1120/T610 plotter quality test printout.

HP Designjet T1100/t1120/t610 Plotters Models We Repair!

We stock parts for most models of HP DesignJet T1100, T1120 and T601 plotters!

DesignJet T1100 | 1120 | t610 plotter description HP T100, t1120, t610 plotter model numbers
HP Designjet T1100 repair (24″) | HP T1100 service Q6683A | Q6683AR
HP Designjet T1100PS Plotter Repair (24″) Q6684A | Q6684AR
HP Designjet T1100 Plotter Repair (44″) Q6687A | Q6687AR
HP Designjet T1100PS Plotter Repair (44″) Q6688A | Q6688AR
HP Designjet T610 Plotter Repair (24″) Q5669B|Q5669BR
HP Designjet T610 Plotter Repair (44″) Q6712A | Q6712AR
HP designjet T1120 Printer 24 inch (Model CK837A)
HP design-jet T1120 Printer 44 inch (Model CK839A)
HP design jet T1120 Printer 24 inch (Model CK838A)
HP DesignJet T1120 Printer 44 inch (Model CK840A)

Fast on Site Design-jet T1100/t1120 & T610 Plotter Repair/service Los Angeles, Orange County and San Bernardino!

HP Design Jet Plotter Error Codes Introduction:

System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.

Continuable and non-continuable HP DesignJet error codes

Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.

Design-Jet T1100/T1120/T610 error messages HP Design Jet T1100/T1120/T610 plotter Error Description
Designjet T1100/T1120/T610 Error 01.0:YZ Communication with Main PCA failed Return to top of page.
Designjet T1100/T1120/T610 Error 01.1:YZ Error in the Print Mech PCA Request a service/repair estimate.
Designjet T1100/T1120/T610 Error 01.2:YZ Failure reading acumen chip of an Ink Supply Station.
Designjet T1100/T1120/T610 Error 01.3:YZ Device I2C acumen Right Ink Supply Station failure.
Designjet T1100/T1120/T610 Error 02.1:YZ Problem with the Carriage PCA.
Designjet T1100/T1120/T610 Error 03:YZ Problem with Power Supply Unit.
Designjet T1100/T1120/T610 Error 03.0:10YZ Battery of Real time clock ran down.
Designjet T1100/T1120/T610 Error 06:YZ Failure reading/writing NVM in Hard disk.
Designjet Z2100, Z3100, Z3200 08:YZ (or front panel is blank) No communication between the Front Panel and the Main PCA
Designjet T1100/T1120/T610 Error 1:YZ Trailing cable does not seem to be detected.
Designjet T1100/T1120/T610 Error 21:YZ HP-GL/2 accessory card failure
Designjet T1100/T1120/T610 Error 21:YZ Fail moving Service Station.
Designjet T1100/T1120/T610 Error 21.1:YZ Fail moving the Primer Motor of the Service Station.
Designjet T1100/T1120/T610 Error 2x.n:10 Ink supply error found during IDS diagnostic test. The n represents the ink supply that is failing. The ink supply furthest to the left is always 0, and then they count up from left to right.
Design-jet T1100/T1120/T610 Error 22.0:YZ Left Ink Supply Station error
Designjet T1100/T1120/T610 Error 22.1:YZ Left Ink Supply Station error.
Design-jet T1100/T1120/T610 Error 22.2:YZ Right Ink Supply Station error.
Designjet T1100/T1120/T610 Error 22.3:YZ Right Ink Supply Station error.
Design-jet T1100/T1120/T610 Error 24:YZ Ink Setup failure (you must bring purge kit).
Designjet T1100/T1120/T610 Error 31:01 An error has been detected with the cutter.
Designjet T1100/T1120/T610 Error 31:02 An error has been detected with the cutter.
Design-jet T1100/T1120/T610 Error 31:03 Paper is loaded. While testing the cutter, paper should not be loaded
Designjet T1100/T1120/T610 Error 41:03 Media-Axis Motor failure (likely due to friction or obstacles in the media path)
Design jet T1100/T1120/T610 Error 41:YZ Media-Axis Motor failure (likely due to friction or obstacles in the media path).
Design-jet T1100/T1120/T610 Error 42:03 Scan-Axis Motor failure (likely due to obstacles in the scan axis or electrical fault)
Designjet T1100/T1120/T610 Error 42:YZ Scan-Axis Motor failure (likely due to friction or obstacles in the media path).
Design jet T1100/T1120/T610 Error 44:YZ Fan electrical fault, or not connected.
Designjet T1100/T1120/T610 Error 47:03 Star wheels motor error
Designjet T1100/T1120/T610 Error 47:YZ Star wheels motor error
Designjet T1100/T1120/T610 Error 48:YZ PPS system failure.
Design jet T1100/T1120/T610 Error 48:00
Designjet T1100/T1120/T610 Error 51:YZ Window Sensor failure
Design jet T1100/T1120/T610 Error 52:10 he printer has detected fibers in the Drop Detector.
Designjet T1100/T1120/T610 Error 55:YZ Problem with the Line Sensor (Tetris). The printer has detected a failure to access Line Sensor EEPROM.
Designjet T1100/T1120/T610 Error 56:YZ Drive roller analog encoder sensor fail or calibration failed.
Designjet T1100/T1120/T610 Error 58:YZ The color sensor ESP (spectrophotometer) of the printer is not working well. It could be a problem with the spectrophotometer, a communication problem between the spectrophotometer and Carriage PCA or the color sensor shutter does not open properly.
Designjet T1100/T1120/T610 Error 61:YZ The file format is incorrect and the Printer cannot process the job.
Designjet T1100/T1120/T610 Error 62:YZ PC interface issue. Power on and off. Get the latest version of the firmware
Design-jet T1100/T1120/T610 Error 63:YZ input/Output problem through the Network interface of the formatter.
Design jet T1100/T1120/T610 Error 64:YZ Input / Output problem through the USB port
Designjet T1100/T1120/T610 Error 64:YZ Input / Output problem through the USB port
Design-jet T1100/T1120/T610 Error 65:YZ Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error
Designjet T1100/T1120/T610 Error 66:YZ Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded.
Designjet T1100/T1120/T610 Error 67:YZ nput – Output problem through a fire wire port.
Designjet T1100/T1120/T610 Error 68:YZ Loss of engine counters tracking.
Designjet T1100/T1120/T610 Error 71:YZ Out of memory failure.
Designjet T1100/T1120/T610 Error 71:19 Default Serial Number found in the main and backup NVM. It seems that both the Print Mech PCA and Hard Disk Drive have been replaced together.
Designjet T1100/T1120/T610 Error 72:YZ Generic firmware error. Check that the printer has the latest firmware version – if not, update.
Designjet T1100/T1120/T610 Error 72:YZ A service calibration must be performed. Check the internal error code to see which calibration must be performed. To check the internal error code, press UP and CANCEL together while the error code is displayed.
Designjet T1100/T1120/T610 plotter error 73:YZ Server error
Designjet T1100/T1120/T610 plotter error 74:YZ Error uploading firmware update file.
Designjet T1100/T1120/T610 plotter rror 74.1:YZ Error uploading media profile update file.
HP T1100/T1120/T610 plotter error 75.1:YZ Preventative maintenance kit #1 counter active (Scan Axis Components, Ink supply tubes, trailing cable, carriage).
HP Z2100, Z3100, Z3200 plotter error 75.2:YZ Preventative maintenance kit #2 counter active.
Designjet Z2100, Z3100, Z3200 Error 75.21:YZ The spittoons (left spittoon, service station) are full.
Designjet Z2100, Z3100, Z3200 Error 75.22:YZ Hard disk drive is full.
Designjet Z2100, Z3100, Z3200 Error 76:YZ Web access application on the web server is not functioning correctly.
Designjet Z2100, Z3100, Z3200 Error 77:YZ Borderless printing not possible. Setting ignored.
Designjet Z2100, Z3100, Z3200 Error 78:YZ The job received cannot be printed without borders on this paper.
Designjet Z2100, Z3100, Z3200 Error 78:08 Media settings area missing in media settings file.
Designjet Z2100, Z3100, Z3200 Error 78:1:YZ Generic Firmware error.
Designjet Z2100, Z3100, Z3200 Error 79:YZ Generic Firmware error.
Designjet T1100/T1120/T610 Error 79.1:YZ Recoverable firmware error that does not stop the printing process
Designjet T1100/T1120/T610 plotter error 81:YZ Problem with paper advance.
Designjet T1100/T1120/T610 Error 81:YZ This error can occur because the printer has been dropped during transportation, causing structural damage. Before continuing with the 81:YZ troubleshooting, first look for structural damage.
Designjet T1100/T1120/T610 Error 81.1:YZ Problem finding the Drive Roller zero.
Designjet T1100/T1120/T610 plotter error 84:YZ Back tension servo shutdown (roll feeding).
HP T1100/T1120/T6100 plotter error 85:YZ Problem finding the Drive Roller zero.
Designjet T1100/T1120/T610 Error 86:YZ Possible paper jam
Designjet T1100/T1120/T610 Error 86:01 Problem moving the carriage, most likely due to a paper jam.
Designjet T1100/T1120/T610 Error 87:YZ Problem finding the Scan-axis encoder reading.
Designjet T1100/T1120/T610 Error 93:YZ Unable to pressurize the Ink Delivery System or the ISS Motor does not move as expected.
Design-jet T1100/T1120/T610 Error 94:YZ Color calibration error
Design-Jet T1100/T1120/T610 Error 94.1:YZ Profiling algorithm failed.
Design Jet T1100/T1120/T610 Error 98:YZ Automatic backup print mode enabled.

Same-day On-site Designjet T1100, T1120/ and T610 Plotter Service with Belt Kit Replacement!

We provide fast onsite T1100, T1120 and T610 plotter repairs with 6 months warranty on parts and labor. We lubricate the carriage rod on every plotter repair with broken carriage belt. The lubrication keeps the carriage assembly moving freely and avoid the belt to break prematurely.
We stock carriage belts, Hard Drive, trailing cables, ink tubing systems, carriage assembly and print heads for DesignJet T1100, T1120 and T610. We carry most common plotter repair parts for HP T1120, T100 and T610.