DesignJet T770/T1200 plotter repair/service in Southern California.
We provide HP Design Jet T770/T1200 plotter service error code repairs as well as HP T770/T1200 plotter repair with broken carriage belts, not printing right colors, colors print faint, print defect with black lines/blotches, ink tubing system leaking and plotter not printing from the computer. Our DesignJet T770/T1200 plotter service technicians have the technical ability to repair all Design-Jet plotters on the first visit.
We offer design jet T770/T1200 plotter error codes repairs with 11:11 trailing cable failure, 12:11 carriage assembly failure, 21:10 service station failure, 22:10 ink supply station failure, 41:10 paper axis motor failure, 42:10 scan axis motor failure, 79:04 firmware and 86:01 carriage axis shutdown and 47:01 star wheel motor error.
Our Design-Jet T770/T1200 plotter service technicians are trained to troubleshoot and replace broken belts, ink tubing system, purge ink tubing system, replace defective/failing carriage assembly, trailing cable and service station. We stock HP T770/T1200 replacement parts to provide fast onsite plotter service in Southern California.
HP Designjet T610, T620, T770, T790, T100, T1120, T1200, T1300, T2300, Z2100, Z3100 and Z3200 plotter with 24 and 44 inches belt repair!
Fast onsite HP DesignJet T770/T1200 plotter service, DesignJet Z6100, 6200 plotter service, DesignJet 4000/4500 plotter service, 5000/5500PS plotter service, DesignJet 1050C/1055CM plotter service, DesignJet Z2100/Z3100 and Z3200 plotter service, DesignJet T100/T1200/T1300 and T2300 plotter service, DesignJet T790 potter service. We provide older DesignJet 430/450/455 plotter service, DesignJet 700, 750C, 755CM plotter service, DesignJet 500, 510 and 800PS plotter service in Southern California.
HP DesignJet T770/T1200 plotter failures and errors during printing!
We provide most models of HP DesignJet plotter repair with error code failures!
|HP DESIGN JET T770/T1200 PLOTTER DESCRIPTION||HP T770/T1200 plotter models we repair|
|HP Design-jet T770 44 inch plotter repair (with Hard Disk)||(CN375A)|
|HP Designjet T770 24 inch Plotter Repair (with Hard Disk)||(CQ306A)|
|HP Design Jet T1200ps 44 inch Plotter Repair||(CK834A)|
|HP Designjet T1200 44 inch Plotter Repair||(CH538A)|
HP Design Jet T770/T1200 Plotter Error Codes Introduction:
System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.
Continuable and non-continuable HP DesignJet error codes
Some error codes are continuable, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-continuable error codes do not allow work with the printer to continue.
|DESIGNJET T790/T1200 PLOTTER ERRORS||HP DESIGN JET T790/T1200 PLOTTER ERROR DESCRIPTION|
|Designjet T770/1200 series 01.0:YZ error||HCI queue does not end after 2 seconds – problem with formatter and/or main board|
|Designjet T770/1200 series 01.1:YZ error||NVM backup: not found, read, write or read back error|
|Design jet T770/1200series 01.2, 01:YZ error||Print mech PCA fault or NVM backup failure|
|Design-jet T770/1200 series 02.1:YZ error||Encoder seems to be wrong|
|Designjet T770/1200 series 02.2:YZ error||Problem with the Carriage PCA|
|Design jet T770/1200 series 03:YZ error||Problem with Power Supply Unit|
|Design-jet T770/1200 series 05.1:YZ error||CPU Fan is stopped or burnt|
|Designjet T770/1200 series 06:YZ error 06:00, 06:09, 06:10 and 06:19||Main NVM failure – not detected, read/write failed or readback error (HARD DISK FAILURE)|
|Design-jet T770/1200 series 08:YZ error||Problem with the Front Panel|
|Design Jet T770/1200 series 11:01, 11:YZ error||Trailing cable does not seem to be detected|
|DesignjetT770/1200 series 12.n:YZ error||Carriage & PCA Main doesn’t detect pens|
|Design Jet T770/1200 series 21:10, @1:13, 21:YZ error||Fail moving Service Station|
|Designjet T770/1200 series 21.1:YZ error||Service Station servo shutdown|
|Designjet T770/T1200 series 22.0:YZ error||The trailing cable is poorly connected|
|Designjet T770/T1200 series22.1:YZ error||Problem with setting the voltage of the printheads|
|Designjet T770/T1200 series 24:YZ error||A short has been detected in the carriage assembly.|
|Designjet T770/T1200 series 26.n:YZ error||A problem has been detected while initializing.|
|Designjet T770/T1200 series 27:YZ error||A problem has been detected with the Service Station assembly.|
|Designjet T770/T1200 series 29.n:YZ error||A problem has been detected with the Service Station assembly.|
|Designjet T770/T1200 series 31:YZ error||A problem has been detected with the Ink Supply Station.|
|Designjet T770/T1200 series 22.0:YZ error||ISS left BPSO error. (Supplies 0, 1, 2).|
|Designjet T770/T1200 series 22.1:YZ error||ISS left BPS1 error. (Supplies 3, 4, 5).|
|Designjet T770/T1200 series 24:YZ error||Ink Setup failure (Ink Delivery System (IDS) Tubes purge failed).|
|Designjet T770/T1200 series 26.n:YZ error||Order of Ink Supplies incorrect|
|Designjet T770/T1200 series 27:YZ error||An error has occurred in Print-head detection|
|Designjet T770/T1200 series 29.n:YZ error||An error has occurred in Print head detection|
|Designjet T770/T1200 series 31:YZ error||An error has been detected with the cutter|
|Designjet T770/T1200 series 38:YZ error||An error has been detected with the Media Output Tray|
|Designjet T770/T1200 series 41:YZ error||Electrical fault or current limit in Media-Axis Motor|
|Designjet T770/T1200 series 41.1:YZ error||Electrical fault or current limit in Media-Axis Motor|
|Designjet T770/T1200 series 42:YZ error||Electrical fault or current limit in Scan-Axis Motor|
|Designjet T770/T1200 series 44:YZ error||Fan electrical fault, or not connected|
|Designjet T770/T1200 series 45:YZ error||An error with the rewinder System has been detected|
|Designjet T770/T1200 series 47:YZ error||Star wheels motor error|
|Designjet T770/T1200 series 48:YZ error||PPS system failure|
|Designjet T770/T1200 series 51:YZ error||Window Sensor failure|
|Designjet T770/T1200 series 52:YZ error||The printer has detected a problem with the Drop Detector|
|Designjet T770/T1200 series 55:YZ error||Problem with the Line Sensor. The printer has detected a failure to access Line Sensor EEPROM.|
|Designjet T770/T1200 series 56:YZ error||Drive roller analog encoder sensor fail or calibration failed|
|Designjet T770/T1200 series 58:YZ error||Line sensor shutter has failed to open, there is a failure to communicate with the line sensor, the line sensor is not calibrated correctly, or the firmware is not compatible with the Line Sensor.|
|Designjet T770/T1200 series 61:YZ error||The file format is incorrect and the Printer cannot process the job|
|Designjet T770/T1200 series 62:YZ error||PC Interface|
|Designjet T770/T1200 series 63:YZ error||Input/output problem through the Network Card|
|Designjet T770/T1200 series 64:YZ error||Input/output problem through the USB port|
|Designjet T770/T1200 series 65:YZ error||Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error|
|Designjet T770/T1200 series 66:YZ error||Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded.|
|Designjet T770/T1200 series 67:YZ error||Input/output problem through a Fire wire Port|
|Designjet T770/T1200 series 68:YZ error||Loss of engine counters tracking|
|Designjet T770/T1200 series 71:YZ error||Out of memory failure|
|Designjet T770/T1200 series 71:19 error||Default Serial Number found in the main and backup NVM. It seems that both the Print Mechanism PCA and Hard Disk Drive have been replaced together|
|Designjet T770/T1200 series 72:YZ error||Generic Firmware error|
|Designjet T770/T1200 series 73:YZ error||Servo Error|
|Designjet T770/T1200 series 74:YZ error||Error uploading firmware update file|
|Designjet T770/T1200 series 74.1:YZ error||Error uploading media profile update file|
|Designjet T770/T1200 series 75.1:YZ error||Preventative maintenance Kit #1 counter active (Scan Axis Components, Ink Supply Tubes, Trailing Cable, Carriage)|
|Designjet T770/T1200 series 75.2:YZ error||Preventative maintenance Kit #2 counter active|
|Designjet T770/T1200 series 75.3:YZ error||Preventative maintenance Kit #3 counter active (Cutter Assembly)|
|Designjet T770/T1200 series 75.4:YZ error||Preventative maintenance Kit #4 counter active|
|Designjet T770/T1200 series 76:YZ error||Hard disk drive is full|
|Designjet T770/T1200 series 77:YZ error||Web access application. the web server is not functioning correctly|
|Designjet T770/T1200 series 78:YZ error||Borderless printing not possible. Setting ignore|
|Designjet T770/T1200 series 78:1:YZ error||Media settings area missing in media settings file|
|Designjet T770/T1200 series 79:YZ error||Generic Firmware error|
|Designjet T770/T1200 series 79.1:YZ error||Recoverable firmware error that does not stop the printing process|
|Designjet T770/T1200 series 81:YZ error||Problem with paper advance|
|Designjet T770/T1200 series 81.1:YZ error||Problem finding the Drive Roller zero|
|Designjet T770/T1200 series 84:YZ error||Back tension servo shutdown (roll feeding)|
|Design Jet T770/T1200 series 85:YZ error||Problem finding the Drive Roller zero|
|Design-Jet T770/T1200 series 86:YZ error||Possible paper jam|
|DesignJet T770/T1200 series 87:YZ error||Problem finding the Scan-axis encoder reading|
|Design Jet T770/T1200 series 93:YZ error||Unable to pressurize the Ink Delivery System|
|DesigJet T770/T1200 series 94:YZ error||Color calibration error|
|Design-Jet T770/T1200 series 94.1:YZ error||Profiling algorithm failed|
|Designjet T770/T1200 series 98:YZ error||Automatic backup print mode enabled|
We provide fast onsite HP DesignJet T770/T1200 plotter repair/service using genuine HP plotter belt kit with 6 months warranty. After we replace the belt kit we always lubricate the carriage rods to prolong the life of the new belt. The lubrication keeps the carriage assembly moving freely and avoid the belt to break prematurely.
We stock HP Design Jet T770/T1200 carriages Belt Kits, Hard Disk, trailing cables, ink tubing systems, carriage assembly and print heads to provide you fast onsite T770/T1200 plotter service in Southern California. Our HP Designjet repair team carry most common failure parts for HP design jet 8T790 and T1200 series plotters.
We provide fast onsite HP DesignJet T770/T1200 plotter service, HP 4000, 4500 plotter service, HP Designjet 1050c/1055cm service, DesignJet 500/800 plotter service, HP DesignJet 5000/5500 plotter service, DesignJet 500, 500ps and 510 plotter service and HP Design-jet 800, 800ps plotter service. We specialize on DesignJet T1100, 1200/1300 plotter service, Design Jet Z2100, Z3100, Z3200 plotter service, HP DesignJet Z5200, Z6100, Z6200 plotter service. We provide older DesignJet 430/450/455 plotter service and DesignJet 700, 730, 750 and 755 plotter service in Southenr Caifornia.